How To Fix Xfinity Router Blinking Orange Problem in 2022?

If you own an Xfinity router, then you’re probably familiar with the blinking orange light. That’s because this annoying light is the indicator that your router goes on the firmware update. But what you might not know is how to fix the Xfinity router blinking orange light problem.

During this firmware update, your router may sometimes fail to perform, and you might encounter an issue with the blinking orange light. The problem of the blinking orange light is associated with a software update. There are a few methods to solve this bug, and I hope this helps.

If you don’t solve this issue, there is a possibility that you’ll find the same problem with your router again and again. This article will provide you with some important tips to fix it yourself. So let’s start!

Why Xfinity Router Blinks Orange?

  • Firmware Update
  • Defective Piece of a router
  • Malfunctioning Splitter

How To Fix Xfinity Router Blinking Orange Problem?

This is a common problem, so you shouldn’t be surprised. Learn how to fix the Xfinity router blinking orange problem by following these steps.

Wait for the Firmware Update to Be Complete

You can wait for the firmware update to complete. A firmware update is a kind of software update that adds new features. That’s why you should wait for its completion, not stop it midway.


Reboot Your Router

When the update doesn’t work out, you need to reboot the device. Please turn off the router or unplug it from power. Wait for at least a minute before turning it on again.


Check The Splitter

If you have a splitter, then you should check that piece of hardware as well. If you’ve any doubts about it, then try replacing it with a new one for better performance. Typically, this might be the reason for blinking orange light.


Check The Connectivity of Cables

Sometimes, the reason for the blinking orange light problem is on your side. Check that all cables running through your router are tightly connected. If the problem is not with your router, then you should check these cables because it’s an easy problem to fix.


Defective Router

If the router isn’t working properly, then there is a possibility that it might have some issues. If you have an older router with outdated firmware, then this could be a problem. So try to use the proper router.


Reset Your Xfinity Router

You can reset your router to solve all the issues. This quick and easy method doesn’t require any technical skills. Basically, when you reset, you’ll erase all the current settings in your router, and then you’ll set it like a brand new one.

FAQ

My router is connected to the modem, but it doesn’t respond to my pc. How to fix this issue?

Remove all cables and reboot the modem. Plug your computer back into the modem and see if it works. If it doesn’t work, then try to restart your router. Some people say that you need to wait until the power light goes off before you reconnect your modem.

What should I do if there is still no response from my router?

Replace your cable or modem. If you still don’t find any solution, then contact customer support. They’ll do the troubleshooting for you.

My extender isn’t blinking red or orange; what should I do?

It could be that you have an old extender. Try using a new one if your old one is more than three years old. If the extender still doesn’t work, you should contact the providers.

Conclusion

To sum up, a firmware update is a good thing. But sometimes, it can cause some issues. Luckily, you don’t need to do anything complicated to fix your router. Try the tips above, and you’ll never experience the blinking orange light again.

We hope that you find this article helpful on how to fix the Xfinity router blinking orange problem. I hope the information contained in this article helps you fix the Xfinity router blinking orange problem. Leave your comments below if you have any questions or concerns. Thanks for reading! 🙃

Leave a Comment

Share via
Copy link
Powered by Social Snap